First Drill Results Confirm High-Grade Gold System at Rouyn
Released
Released
Announcement PDF
1 | P a g e
27 March 2026 | ASX: ADV
FIRST DRILL RESULTS CONFIRM HIGH-GRADE GOLD SYSTEM AT ROUYN
Including 7m @ 16.1 g/t Au at Astoria from the first holes of the 15,000m drilling program
Best Intercept – Astoria:
7.0m @ 16.1 g/t Au at Astoria, including 1.0m @ 78.7 g/t Au
Key Highlights
Standout Intersections:
o AS-26-778: 3.0m @ 11.4 g/t Au (from 68m) including 1.0m @ 24.6 g/t Au
o AS-26-779: 7.0m @ 16.1 g/t Au (from 131m) including 1.0m @ 78.7 g/t Au & 1m @ 27.0 g/t
o AS-26-779: 11.0m @ 2.6 g/t Au (from 149m) – Astoria footwall zone
The holes were designed to test extensions to mineralisation of the currently modelled orebody, with
results confirming continuity of high-grade zones typical of deposits along the Cadillac–Larder Lake
Break
Results represent the first assays from Ardiden’s 2026 drilling program, the first holes representing
822m of the planned 15,000m campaign
Astoria was selected as the starting point due to its existing resource base and strong potential for
down-plunge resource growth
Mineralisation remains open along strike and at depth across Ardiden’s 6km Rouyn gold corridor
The project is situated on the Cadillac–Larder Lake Break, one of the most prolific and high-value gold
structures in the Abitibi Greenstone Belt
Commentary
Managing Director Andrew Stocks said the initial drilling results confirm the Company’s geological interpretation
of the Astoria system.
“These first results from Astoria represent an excellent start to our 2026 drilling campaign.
“Intersecting 16.1 g/t over 7 metres, including a high-grade core of 78.7 g/t, confirms the Astoria system
continues to deliver high-grade intersections typical of Abitibi orogenic gold deposits and remains open.
“Astoria was selected as the starting point for this year’s drilling program because it hosts an existing
resource and offers the most immediate opportunity to expand mineralisation through down-plunge drilling.
“Importantly, these results represent only the first assays from our planned 15,000 metre drilling campaign.
Astoria forms part of our broader six-kilometre Rouyn gold corridor, where multiple project areas remain
open for systematic expansion”.
The Company expects to complete approximately 15,000 metres of diamond drilling across multiple targets in
Ardiden’s first program at Rouyn during 2026, with results from the current Astoria program expected to guide
further drilling and geological modelling.
2 | P a g e
Summary
Ardiden Limited (ASX: ADV) is pleased to report high-grade gold assay results from the first batch of three holes
completed during the 2026 diamond drilling campaign at the Astoria deposit, part of its 100%-owned Rouyn
Gold Project in Québec, Canada.
These intersections support Ardiden’s interpretation that Astoria hosts a structurally controlled orogenic gold
system typical of deposits found along the Cadillac-Larder Lake Break, one of the most productive gold structures
within the Abitibi Greenstone Belt.
Astoria represents one of several project areas located along Ardiden’s ~6km Rouyn gold corridor, which
currently hosts a Mineral Resource Estimate (JORC 2012) comprising 1.66 million ounces of gold at an average
grade of 3.28 g/t Au, previously announced to the ASX on 10 October 2025 – refer to Mineral Resource Estimate
table on page 6.
Figure 1: Rouyn Gold Project showing Astoria within Ardiden’s 6km mineralised corridor
The initial results from Astoria represent an encouraging start to Ardiden’s inaugural drilling campaign at the
Rouyn Gold Project and demonstrate the potential for continued growth within the existing mineralised system.
As drilling continues across the broader Rouyn corridor, the Company believes there remains strong potential
to expand the existing Mineral Resource and define additional high-grade zones along this highly prospective
structural trend.
Importantly, deposits along the Cadillac–Larder Lake Break are well known for developing high-grade shoots
that extend to significant depths, and the results reported here provide early encouragement that the Astoria
system may exhibit similar structural controls and potential for vertical continuity.
3 | P a g e
Table 1 – Significant Drill Intercepts
Hole From (m) Interval (m) Grade (g/t Au)
AS-26-777 35.0 1.0 4.1
AS-26-778 68.0 3.0 11.4
including 1.0 24.6
AS-26-779 131.0 7.0 16.1
including 1.0 78.7
and 1.0 27.0
AS-26-779 149 11.0 2.61
Significant intercepts are reported using a lower cut-off of 0.2g/t Au and a minimum intercept length of 0.3m.
Refer to Appendix A for full drill-hole collar and intercept tables.
Figure 2 (L to R) Cross sections of the Astoria deposit showing holes AS-26-778 & AS-26-779
AS-26-778
AS-26-779
7.0m @ 16.1 g/t Au
including
1.0m @ 78.7 g/t Au, &
1.0m @ 27 g/t Au
AS-26-779
11.0m @ 2.61 g/t Au
AS-26-779
AS-26-778
3.0m @ 11.4 g/t Au
including
1m @ 24.6 g/t Au
4 | P a g e
Technical Discussion
The 2026 campaign has targeted the Main and Footwall contact zones at Astoria. Mineralisation encountered
in the new drill holes includes:
quartz-carbonate veining,
strong hydrothermal alteration, and
arsenopyrite-pyrite sulphide mineralisation.
These features are consistent with classic Abitibi-style orogenic gold systems. Mineralisation occurs within a
broad hydrothermal alteration system developed along the komatiite-sediment contact and associated
structural corridor. The observed mineralisation, including quartz-carbonate veining and sulphide
mineralisation is characteristic of many major deposits and mines within the Abitibi Greenstone Belt.
Observed intercept widths of 3-7 metres are consistent with mechanised underground mining scenarios.
Furthermore, grade-thickness relationships observed to date support the potential for high-ounce-per-vertical-
metre mineralisation. Such widths and grades are consistent with underground mining operations currently
operating along the Cadillac–Larder Lake Break.
Mineralisation remains open along strike and at depth.
Figure 3 Drill core from the Astoria project area being examined and logged by the Explo-Logik team
5 | P a g e
Strategic Context – 6km Rouyn Gold Corridor
The Rouyn Gold Project covers a continuous structural corridor of approximately six kilometres along the
Cadillac–Larder Lake Break, providing a rare, district-scale opportunity in one of the most prolific gold-bearing
structures in the heart of a premier global gold corridor.
Project areas located along this corridor include:
Astoria
Cinderella
Gamble
Augmitto
Collectively, these areas comprise the Rouyn Gold Project.
The structural setting and style of mineralisation observed at Astoria are mirrored across several targets along
the corridor, supporting Ardiden’s strategy of systematically advancing multiple areas along the Rouyn structural
trend.
Geological Analogue: Benchmarked Against the Best
The structural setting at Astoria, characterised by quartz-carbonate veining within the Cadillac-Larder Lake
Break, occurs in a similar structural setting to several of the Abitibi region’s most significant and profitable
producers:
LaRonde (Agnico-Eagle): Renowned for its considerable depth continuity (>3km) and consistent high-
grade mineralisation.
Westwood (IAMGOLD): A premier high-grade underground operation located directly along the same
regional structure.
Lapa (Agnico-Eagle): A former high-grade mine and Astoria-style analogue, characterised by narrow,
high-tenor shoots with exceptional ounce-per-metre productivity.
Next Steps
Near-term activities at Rouyn will include:
completion of the 15,000m drilling program,
integration of drilling data into the geological model,
potential Mineral Resource Estimate update, and
progression of commercial and mining studies.
Assay results from the remaining drill holes will be released as received.
6 | P a g e
Figure 4 Major gold mines, processing plants and projects of the Abitibi region
Mineral Resource Estimate – Rouyn Gold Project, Québec
The Rouyn Gold Project currently hosts a Mineral Resource Estimate (JORC 2012), previously announced to the
ASX on 10 October 2025.
Classifica on Material type
Au cut-off
(g/t)
Tonnage
(Mt)
Grade
(g/t)
Gold Ounces
(koz)
Indicated Ultramafic 1.72 8.5 3.29 898
Argillite 2.07 0.7 3.43 78
Total Indicated 9.2 3.30 976
Inferred Ultramafic 1.72 5.6 3.13 565
Argillite 2.07 1.0 3.86 126
Total Inferred 6.6 3.24 690
TOTAL
Indicated & Inferred
15.8 3.28 1,666
Note: Due to effects of rounding, totals may not represent the sum of all components.
7 | P a g e
This announcement is intended to lift the existing trading halt.
This information is authorised for ASX release by the Board.
Engage with this announcement at the Ardiden Investor Hub.
For further information:
Andrew Stocks Matthew Keegan
Managing Director Executive Director
Tel: +61 8 6184 5938
investors@ardiden.com.au
More information is available from the Company’s website: www.ardiden.com.au
About Ardiden
Ardiden Limited (ASX: ADV) is a Canadian-focused gold exploration and development company. Following
completion of its merger with Lac Gold Limited, Ardiden holds a 100% interest in the Rouyn Gold Project (Québec)
and the Pickle Lake Gold Project (Ontario).
The Company’s strategy is to advance high-quality gold assets through disciplined technical execution, structured
economic evaluation and responsible stakeholder engagement. By systematically de-risking its projects and
progressing through defined development stages, Ardiden aims to narrow the valuation gap relative to its peer
group and deliver sustainable value for shareholders.
Figure 5 Drilling at the Astoria project area of the Rouyn Gold Project
8 | P a g e
Forward-Looking Statements
This announcement may contain some references to forecasts, estimates, assumptions and other forward-
looking statements. Although the Company believes that its expectations, estimates and forecast outcomes are
based on reasonable assumptions, it can give no assurance that they will be achieved. They may be affected by
a variety of variables and changes in underlying assumptions that are subject to risk factors associated with the
nature of the business, which could cause actual results to differ materially from those expressed herein. All
references to dollars ($) and cents in this presentation are to Australian currency, unless otherwise stated.
Investors should make and rely upon their own enquires and assessments before deciding to acquire or deal in
the Company’s securities.
Competent Persons Statement – Exploration Results
The information in this report that relates to Exploration Results at the Rouyn Gold Project is based on, and
fairly represents, information and supporting documentation compiled by Ms Suzie Tremblay, P.Geo., a member
of the Ordre des Géologues du Québec (OGQ), a Recognised Professional Organisation (RPO). Ms Tremblay is a
full-time employee of Explo-Logik Inc., an independent geological consulting firm engaged by Ardiden Limited.
Ms Tremblay has sufficient experience relevant to the style of mineralisation and type of deposit under
consideration and to the activity being reported to qualify as a Competent Person as defined in the 2012 Edition
of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves.
The Competent Person has reviewed the underlying data and confirms that it fairly represents the exploration
results reported.
Ms Tremblay consents to the inclusion in this report of the matters based on this information in the form and
context in which it appears.
Competent Person’s Statement Rouyn Gold Project – Mineral Resource Estimate
The information in this announcement that relates to Mineral Resources for the Rouyn Gold Project has been
extracted from the ASX announcement titled “Ardiden and Lac Gold to Create a Leading Canadian Gold
Exploration and Development Company” released on 10 October 2025 and available at www.asx.com.au.
Ardiden Ltd confirms that it is not aware of any new information or data that materially affects the information
included in that announcement, and that all material assumptions and technical parameters underpinning the
estimates in that announcement continue to apply and have not materially changed. Ardiden Ltd also confirms
that the form and context in which the Competent Person’s findings are presented have not been materially
modified from that announcement.
9 | P a g e
APPENDIX A: DRILLING RESULTS
Significant intercepts are reported using a lower cut-off of 0.2g/t Au and a minimum intercept length of 0.3m.
All intercepts are downhole lengths. True widths are unknown at this stage.
AS-26-777 AS-26-779
From (m) To (m) Length (m) Grade g/t Au From (m) To (m) Length (m) Grade g/t Au
35 36 1 4.12 106 107 1 1.63
38 39 1 0.31 119 120 1 0.44
120 121 1 1.44
AS-26-778 121 122 1 1.36
From (m) To (m) Length (m) Grade g/t Au 124 125 1 0.82
19 20 1 0.37 125 126 1 0.88
64 65 1 1.59 126 127 1 0.24
66 67 1 0.41 127 128 1 0.23
67 68 1 0.22 129 130 1 0.45
68 69 1 1.46 130 131 1 0.49
69 70 1 24.60 131 132 1 1.05
70 71 1 8.13 132 133 1 3.42
71 72 1 0.47 133 134 1 1.33
73 74 1 1.57 134 135 1 78.70
74 75 1 0.62 135 136 1 1.33
137 138 1 27.00
145 146 1 0.45
147 148 1 0.23
148 149 1 0.26
149 150 1 2.68
150 151 1 0.40
151 152 1 3.48
152 153 1 6.71
153 154 1 1.62
154 155 1 1.03
155 156 1 2.32
156 157 1 1.39
157 158 1 2.26
158 159 1 1.11
159 160 1 5.70
10 | P a g e
APPENDIX B: COLLAR INFORMATION FOR COMPLETED DRILL HOLES
Hole ID Prospect /
Target
Azimuth Dip Hole
Length (m)
Easting
(UTM
NAD83
Zone 17)
Northing
(UTM
NAD83
Zone 17)
RL (m) Status
AS-26-777
Astoria
West
180 -45 39 646144 5339799 298 Completed
AS-26-778
Astoria
West
182 -72 402 646144 5339808 298 Completed
AS-26-779
Astoria
West
180 -45 381 646059 5339835 303 Completed
JORC CODE, 2012 EDITION – TABLE 1
JORC Code Table 1 Criteria - The table below summarises the assessment and reporting criteria used for the Rouyn Gold Project sampling techniques and
data guidelines in Table 1 of The Australasian Code for the Reporting of Exploration Results, Mineral Resources and Ore Reserves (the JORC Code, 2012).
Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as downhole gamma sondes, or
handheld XRF instruments, etc.). These samples should
not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done
this would be relatively simple (e.g. ‘reverse circulation
drilling was used to obtain 1 m samples from which 3 kg
was pulverised to produce a 30 g charge for fire assay’).
In other cases more explanation may be required, such
as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant disclosure of
detailed information.
Samples have been collected by diamond drilling techniques
(see below).
Drillholes are orientated perpendicular to the interpreted
strike of the mineralised trend except where limited access
necessitates otherwise.
Diamond core sampled in intervals of ~1 m where possible,
otherwise intervals less than 1 m selected based on
geological boundaries.
The core was logged, cut, and sampled by qualified personnel
at Explo-Logik core shack in Val D’Or and samples submitted
to AGAT Laboratories (AGAT) in Québec.
The same side of the core was consistently sampled to avoid
selective sampling bias.
Gold was analysed by fire assay (50 g) with atomic absorption
finish, while base metals were analysed by four-acid
digestion with ICP-OES finish. All samples received by AGAT
were crushed to 90% passing 2-10 mm mesh sieve. This was
then riffle split to a 250 g sample which was pulverised to
90% passing 75 microns.
Samples with gold grades greater than 10 g/t are reprocessed
using gravity finish. The processed material is split and
analysed by fire assay with ICP-OES finish to extinction. A
separate split is prepared to independently analyse
mineralized intervals with a target grade greater than 1.00%
Cu-Zn using a Na₂O₂ fusion with ICP-OES or ICP-MS finish.
All samples containing visible gold were sent for metallic
screen analysis.
These techniques are considered appropriate for the
mineralisation expected at all properties.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (e.g. core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
All samples and geological information have been derived
from diamond core using standard equipment of NQ size (47.6
mm diameter).
The drill holes were completed by Forage Val d’Or of Québec
in 2026.
The drill core was oriented by Forage Val d’Or and verified by
Explo-Logik of Québec.
Drill sample
recovery
Method of recording and assessing core and chip
sample recoveries and results assessed.
All drill core was measured and compared to actual drilled
depths on a run-by-run basis by the company geologist and
driller to determine core recovery and Rockmass Quality Data
11 | P a g e
Criteria JORC Code explanation Commentary
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
(RQD). Recoveries averaged higher than 98% with the only
loss of material coming from the overburden. This horizon is
not considered prospective for Ardiden Ltd’s purposes.
Core recovery through the mineralized zones is greater than
98%.
No sample bias was observed.
Logging Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining
studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
All diamond core has been marked up, inspected, logged and
photographed by suitably trained and qualified personnel of
Explo-Logik.
Logging detail includes depth, hole orientation, lithology,
alteration, veining, mineralogy, mineralisation, RQD, magnetic
susceptibility and structure. These methods involve a
combination of both qualitative and quantitative
determinations.
Diamond core was logged in its entirety.
Sub-sampling
techniques and
sample
preparation
If non-core, whether riffled, tube sampled, rotary split,
etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected, including
for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size
of the material being sampled.
All samples have been derived from NQ diamond core and have
been cut in half or quarter using a standard core saw. Foliation
is aligned perpendicular to the cut. This technique is considered
appropriate for the mineralisation observed at the properties.
Crushing stage duplicates have been submitted to the assay
laboratory at a rate of 1:20 to evaluate the sampling technique
as per standard industry practise.
Ardiden has retained and stored all remaining half-core
samples for future reference/use.
Sample preparation follows industry best practice standards
and is conducted by internationally recognised and certified
laboratories.
Quality control samples inserted include field duplicates (1 in
20), standards (1 in 20) and blanks (1 in 50).
Sample sizes are consistent with industry standards and are
considered appropriate for the mineralisation.
Quality of assay
data and
laboratory tests
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy (i.e.
lack of bias) and precision have been established.
AGAT is a certified laboratory (ISO/IEC 17025 accredited) and
subject to internal QAQC processes.
AGAT digest processes are considered total and appropriate for
this style of mineralisation.
Explo-Logik determined SG values have been derived from
whole-sample wet/dry weights using a suitable set of electronic
scales as per industry standard practise.
Geophysical tools have not been used.
Field duplicates have been inserted at a ratio of 1:20 samples.
Samples of Certified Reference Material (CRM) for gold and
blanks have been inserted into the sample stream at a ratio of
1:20 and 1:50 for respectively.
AGAT is subject to their own internal QAQC determinations. A
duplicate sample is generated for crushed samples at a rate of 1
in 50. Another duplicate for pulverised samples is generated at
a rate of 1 in 50.
Laboratory instruments are calibrated every 42 samples.
Laboratory blanks (x 2), certified reference materials (x 2) and
sample duplicates (x 3) were analysed within every 42 samples
in the batch tray.
Explo-Logik has reviewed the QAQC results, and they are
considered acceptable.
Verification of
sampling and
assaying
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Results have been reviewed by the Exploration Manager
(Competent Person). The data is imported into Micromine
software for visual checks and database validation by the
Competent Person.
Twinned holes have not been employed as a check to the
current program at this stage.
Sample results were imported into the company database
following validation checks by Explo-Logik.
All data is electronically logged in Access and stored on the
12 | P a g e
Criteria JORC Code explanation Commentary
Company’s database. A master copy of this data exists on the
Ardiden Ltd server in Australia.
No adjustments have been made to the assay data.
Location of data
points
Accuracy and quality of surveys used to locate drillholes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
The 2026 program of drilling was subject to suitable location
and orientation techniques given the technically difficult nature
of the location and magnetic lithologies.
Initially, drill hole locations were surveyed in NAD83-17 using a
hand-held GPS and notes have been recorded on how these
locations relate to existing drill holes and clearings.
All drill collars will be collected with a DGPS at the end of the
drill campaign.
The drill rig was aligned to planned azimuth using a Axis
automatic positioning system (APS), a satellite seeking
instrument prior to collaring.
Downhole surveys were conducted using a true north seeking
Imdex Omnix42 tool. This instrument records dip, true north
azimuth, and temperatures. This tool is not affected by
magnetism.
Surveys were all calculated to UTM Grid North (NAD83 Zone
17) based on grid convergence angles.
Data spacing and
distribution
Data spacing for reporting of Exploration Results.
Whether the data spacing, and distribution is sufficient
to establish the degree of geological and grade
continuity appropriate for the Mineral Resource and Ore
Reserve estimation procedure(s) and classifications
applied.
Whether sample compositing has been applied.
Diamond drill hole locations have been selectively targeting
mineralisation based on regional orientations known along
strike.
Mineral Resource estimate has not been prepared.
No sample composites have been created.
Orientation of
data in relation
to geological
structure
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which
this is known, considering the deposit type.
If the relationship between the drilling orientation and
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
There is no expected assay bias resulting from the orientation
of drilling due to the nature of mineralisation observed at all
locations.
Sample security The measures taken to ensure sample security. Diamond drill core was transported from site by Explo-Logik to
a secured core processing facility for cutting and sampling.
Drill core was stored in a secure facility prior to sampling.
Samples were subsequently sent by Explo-Logik to the assay
laboratory.
Audits or reviews The results of any audits or reviews of sampling
techniques and data.
A full sample review was conducted prior to writing sampling,
logging and QAQC procedures for all Ardiden Ltd personnel.
These procedures were then used for the current program and
supervised internally by Explo-Logik personnel in charge of the
due-diligence program.
Section 2 Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral tenement
and land tenure
status
Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures, partnerships,
overriding royalties, native title interests, historical
sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting
along with any known impediments to obtaining a
licence to operate in the area.
The Rouyn Gold Project comprises 73 Mining Claims and 1
Mining Concession which collectively host the Astoria, Lac
Gamble, Cinderella and Augmitto gold deposits.
The project carries a 2% NSR royalty, with an additional 0.5%
NSR on Cinderella, both held by Yorbeau Resources Inc., a TSX-
listed exploration company.
Ardiden Limited owns 100% of the mining claims and concession
through its wholly-owned Canadian subsidiary, Lac Gold (Rouyn)
Inc.
There are no known issues affecting the security of title or
13 | P a g e
Criteria JORC Code explanation Commentary
impediments to operating in the area.
Exploration done
by other parties
Acknowledgment and appraisal of exploration by other
parties.
The Rouyn Gold Project has over 100 years of exploration and
production history. Over 2,428 diamond drill holes totalling
436,678 m has been completed historically confirming the
presence of multiple extensive gold mineralized zones.
Historical drilling and exploration data have been reviewed
where possible through examination of drill logs, assays and
available digital databases.
ERM International Group Limited has defined a Mineral
Resource Estimate of 1.66Moz Au @ 3.28g/t Au in compliance
with the JORC Code (2012). Refer to the Mineral Resource
Estimate summary table on page 6 of this announcement.
Ardiden confirms it is not aware of any new information or data
that materially affects the information included in that
announcement.
Geology Deposit type, geological setting and style of
mineralisation.
The Rouyn Gold Project is classified as an orogenic gold
deposit. The Project is located on the Lake Larder Cadillac Fault
Zone (LLCFZ) and related to other second-and third-order
structures. Economic deposits are restricted to the influence
zone of the LLCFZ in the ultramafic rocks of the Piché Structural
Complex and peripheral to the ultramafic rocks in the
Timiskaming sediments. Four deposits/project areas have been
defined:
o Augmitto
o Cinderella
o Gamble
o Astoria.
These deposits share similar geological characteristics.
Gold mineralisation is hosted within a large hydrothermal
alteration system developed along the Lake Larder Cadillac Fault
Zone. Mineralisation is mainly found within carbonatized
ultramafic rocks forming irregular lenses of vein stockworks at
structurally favourable locations within the system. Gold-
bearing veins are associated with carbonates, fuchsite, silica,
tourmaline and occasionally albite alteration, as well as free
gold and minor arsenopyrite minerals. Depending on the
structural components of the area, one to several carbonatised
horizons support a mineralised zone. These zones strike east-
west or northeast and dip north or northwest. They are flanked
by rheologically weaker and less permeable talc-chlorite-altered
ultramafic rocks.
Mineralisation within the Rouyn system commonly occurs
within structurally controlled zones with potential for down-
plunge continuity of higher-grade shoots.
Drillhole
Information
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drillholes:
easting and northing of the drillhole collar
elevation or RL (elevation above sea level in
metres) of the drillhole collar
dip and azimuth of the hole
down hole length and interception depth
hole length
Drillhole/sample location and other relevant details are
described in the body of the text, in Appendices and related
Figures in this announcement.
All exploration information has been
Share your feedback
Discover